About sublimation print (Toner Cartridge SDTC A410)
You can transfer the design to the material by applying the paper that has been mirror-printed with this printer to the light-colored polyester material and heat-pressing it. If the material is a blended fabric, 80% or more polyester is recommended.
It can also be transferred to hard sublimation materials (plates, cups, etc.). please contact your dealer for a special heat press machine etc.
Attention & Request (Toner Cartridge SDTC A410)
Copy paper (plain paper: medium-thick paper) can be used as the paper. Other papers can be set, but please contact your dealer for recommended papers.
Paper printed with SDTC A410 cannot be recycled. When it is not needed, dispose of it as combustible waste regardless of whether or not it has been transferred.
Color reproducibility is not covered by the warranty. Please use the profile data provided by the download or adjust from the software you are using.
About white and color toner print (Toner Cartridge PTC A410)
By replacing the cartridge from SDTC to PTC and using special paper, white toner and color toner can be transferred to various materials such as dark color and cotton.
Attention & Request (Toner Cartridge PTC A410)
Install PTC A410W1 (white toner) in the frontmost slot containing SDTC A410K.
Special paper is required to transfer the toner, so reverse print on the special paper with the thick paper setting (Thick Paper 2). For detailed procedures, please refer to the print procedure videos on this site.
You can print on plain paper for office use by attaching PTC A410K. Also, printing on black paper with PTC A410W1 attached may result in printing defects depending on the paper specifications (resistance). Please contact your dealer for the black paper that can be used.
Attention & Request (SDTC / PTC common)
It is recommended that the installation environment of the main unit is 32℃ or less and the usage environment is 25℃ or less. Avoid installing in a location on the south side where the temperature tends to be high in the summer, such as when exposed to sunlight. (Although it can be used outdoors within the above range, please be careful about leaving it in the car, which tends to get hot, and mixing dust into the SDP A410.)
If it will not be used for a long period of time, return the fixing lever to the shipping state (tilt it toward you). If you leave the fixing lever as it is, it may make a rattling noise when it is reused, which may affect the print quality.
Reheating the heat-pressed transfer will degrade the quality. Do not use an iron or tumble dryer on the transfer.
Used cartridges will be collected. Please contact your dealer.
The number of pages is based on continuous printing of a particular pattern. Please note that it depends on the print content, environment, and method.
The printing quality of Toner Cartridge SDTC A410 will deteriorate if left at 35 ℃ or more for a long time. Please store it in a place below 35 ℃ in the shade.